Liquid silicone rubber HY-95XXAB series for diving eyes
Liquid silicone rubber HY-95XXAB series for diving eyes
addMolding liquid silicone rubber
(3. General-purpose liquid silicone rubber)
2.Liquid silicone rubber for diving glasses
(1)Basic model:HY-95XXA/B series
(2) Main features and benefits
This series of products is a two-component liquid silicone rubber suitable for the injection molding process. It has the characteristics of high transparency, high tear resistance and low product odor.
(3) Product Features
•HightransparentSpend
•Excellent strength
•Excellent yellowing resistance
•Molded products have little smell
•conform toFDA,ROHSetc. standards
(4) Typical uses
Diving glasses and accessories
(5) Package
20kg/200kgstandardbucket,A:B=1:1
(6) Typical physical properties
| index | Reference standard | unit | HY-9520 | HY-9530 | HY-9540 | HY-9550 | HY-9560 | HY-9570 |
| Exterior | transparent | transparent | transparent | transparent | transparent | transparent | ||
| viscosity | DIN 53019 | Pas | 200 | 300 | 400 | 700 | 800 | 900 |
| density | DIN53 479A | g/cm3 | 1.08 | 1.09 | 1.10 | 1.11 | 1.12 | 1.13 |
| hardness | DIN53 505 | A | 20 | 30 | 40 | 50 | 60 | 70 |
| Tensile Strength | DIN53 504 S2 | MPa | 7.0 | 7.5 | 8.0 | 8.5 | 7.5 | 7.0 |
| Tear strength | ASTM D624 Die C | KN/m | 15 | 25 | 30 | 35 | 35 | 30 |
| Elongation | DIN53 504 S2 | % | 900 | 700 | 600 | 550 | 400 | 350 |
| vulcanization conditions | 140℃*10min | |||||||
(7) Remarks
The above typical data are for reference only and cannot be used as a basis before use. The specific molding process conditions should depend on the specifications and models of the product. You can also contact our company's engineering department.
